• ATEX Ex II 1G, EExia d IIC T4
• Instrument IP65. Cartridge IP54.
• Certified Temperature: -20C to +55C
• Material: Impact Resistant Plastic
• Impact Model Detects: Flammable Gas, O2, CO, H2S
• Impact Pro Model Detects: Flammable Gas, O2, CO, H2S, SO2, CL2, CIO2, NO2, NH3, CO2.
• Features Audible Alarm, Visual Alarm, intuitive menu, multi-lingual.

IMPULSE XP DISPOSABLE SINGLE GAS DETECTOR

Zones 0, 1 & 2
Intrinsically Safe

• ATEX Ex II 1G, EEx ia IIC T4
• IP54.
• Operating Temperature: -20C to +50C
• Max operating life: 2 years after activation
• Detects: O2, CO, H2S
• Features Audible Alarm - 95db @10cm, Visual Alarm - high density red LEDs, vibrating alarm, custom LCD display.
• Dimensions:87x50x27mm
• Weight: CO/H2S 73g O2 73g

• ATEX Ex II 2G, EExd ia IIC
• IP66/67.
• Certified Temperature: -40C to +65C
• 24Vdc nominal (18-32Vdc)
• Stainless Steel 316 enclosure
• Operating Humidity: 0-99% (non-condensing)
• 3 fully configurable relay outputs and an isolated 4-20mA signal.
• Choice of digital output protocols.
• Detects over 40 toxic gases and a wide range of flammable gases

• ATEX Ex II 2G, EExd ia IIC T4.
• IP65 as standard. IP66/67 with weather protection.
• Certified Temperature: -55C to +60C
• Voltage: 18 to 30Vdc, 0.9W maximum.
• Material: PPS
• Signal Output: Loop powered 4 to 20mA
• Operating Pressure: 90 to 110kPa
• Humidity 20-90% (continuous), 10 to 99% (intermittent).
• Detects C0, CL2, SO2, O2, NO2, NO, NH2, H2S, H2.

• LEL: ATEX Ex II 2G, EExd IIC T3-T6.
• PPM: ATEX Ex II 2G, EExd IIC T5-T6.
• IP65 as standard. IP66/67 with weather protection.
• LEL: Certified Temperature: -55C to +60C or -55C to +150C
• PPM: -30C to +65C
• Material: Polyphenylene sulfide (PPS).
• Supply: 200mA: 0.7W max
• Signal Output: mV Bridge
• Operating Pressure: 90 to 110kPa

• ATEX Ex II 2G, EExd IIC T4 or T5.
• IP66/67
• Certified Temperature: -40C to +65C
• 18-32V (24V nominal)DC, <4.5W max.
• Fast speed of access
• Dual channel, fully compensated infrared optical configuration.
• Failsafe Operation.

• ATEX Ex II 2G, EExd IIB + H2 T5.
• IP66
• Certified Temperature: -40C to +85C
• Material: Copper-free aluminium with powder coat finish or stainless steel.
• Voltage: 24Vdc nominal. 56mA typical normal operation; 68mA typical fire conditions.
• Operating Pressure: 90 to 100kPa
• Relay Outputs: Fire, verification, fault. Analogue Output: 0 to 20m(A) option

HDI HEAT DETECTOR

Zones 0, 1 & 2
Intrinsically Safe, Increased Safety,Flameproof.

• ATEX Ex II 1G, EExia IIC T6
• ATEX Ex II 2G, EExd IIB T6, EExem II T6.
• IP66/67
• Certified Temperature: EExia -55C to +55C
• Certified Temperature: EExd/EExem -20C to +55C
• EExia: 30V, 300mA.
• EExd I EExem: 125Vac (5A), 125Vac (0.5A), 48Vdc (1A)

• ATEX Ex II 1G, EExia IIC T6 Ta 55C
• Certified Temperature: -10C to +55C
• Polycarbonate (Ivory White) enclosure
• 15-30Vdc.
• Alarm State Current: (at 24Vdc): 50mA (max)
• 60°C fixed temperature element
• Twin fire LED’s allow 360º viewing

• ATEX Ex II 1G, EExia IIC T5 Ta 55C
• Certified Temperature: -10C to +55C
• ABS (Ivory White) enclosure.
• 15-30Vdc.
• Alarm State Current: (at 24Vdc): 50mA (max)
• Twin fire LED’s allow 360º viewing.