MENU
Manual Set Point Stations
Loop Powered
Indicators
Rate Totalisers
Loop
Rate
Totalisers Pulse
Counters, Timers, Tachometers,
Clocks
CONTACTS
CERTIFIED MANUAL SET POINT STATIONS AVAILABLE
Loop powered manual set point stations enable the current flowing in a 4/20mA loop to be adjusted from within a process area. Two panel mounting models are available, one has ATEX intrinsic safety certification for use in hazardous areas, the other is a general purpose model for use in safe areas. Both can be supplied with an internal digital display that may be calibrated to show the 4/20mA current in engineering units.
 |
|
Please contact a member of the A.S.P. Sales Team for more information and Datasheets on any of these models. |
| Intrinsically Safe Models | BA405C | BA405C-IND | ||
|---|---|---|---|---|
| Mounting | Panel 96x48mm | Panel 96x48mm | ||
| Protection | Front IP65 Rear IP20 | Front IP65 Rear IP20 | ||
| Certification | ATEX Group II Category 1G EEx ia IIC T5 | ATEX Group II Category 1G EEx ia IIC T5 | ||
| Control | 10 turn knob | 10 turn knob | ||
| Internal Display | None | 100% digit | ||
| Options: | ||||
| Loop Powered backlight | Yes | Yes | ||
| Separately powered backlight | Yes | Yes | ||
| Go back to... Products Page |
